How to know the best engine oil for cars
The best engine oil for your car is determined by whether you have a gasoline or diesel engine. Because the combustion temperature, for example, is different, a gasoline engine requires an extra engine oil than a diesel engine.
As a result, automobile manufacturers customize the needs for engine oil and replacement intervals for each model. The needed engine oil classification and specification can be found in your vehicle’s operating instructions.
The ACEA specification, the API classification, and the SAE viscosity class are all significant. In addition, some automobile manufacturers have their test standards, and it is stated on the engine oil label whether the oil meets the car manufacturer’s requirements (e.g., VW 503.00). For your convenience, we’ve compiled a list of BMW, Mercedes-Benz, and Volkswagen specifications.
With the new VW engine oil finder, you can find out which oil you need in just 15 seconds if you drive a VW. If you already know which manufacturer’s standard your vehicle’s engine oil must meet, our overviews will show you the permitted oils:
The best engine oil for cars and how to find the suitable one for your car
First, check the owner’s manual and follow the automaker’s recommendations. Some newer cars have electronic oil monitors and don’t have traditional dipsticks for manual inspection. If checking the oil yourself, make sure the car is parked on level ground and, with most cars, the engine is cold, so you don’t burn yourself on a hot engine part.
(With some vehicles, the automaker recommends that the oil be checked after the engine has been warmed up.) Then, with the engine off, open the car’s hood and find the dipstick. Pull the dipstick out from the engine and wipe any oil off from its end. Then insert the dipstick back into its tube and push it back in.
Consider motor oil to be the lifeblood of your vehicle’s engine. Regularly inspecting it is an essential component of keeping your engine in good working order and getting the most mileage out of it. The oil lubricates the internal working elements of the engine, preventing them from wearing down too quickly. It helps to keep the engine functional, clean and prevents it from overheating by reducing dirt buildup.
How to check the oil level of your car
The procedure for checking your oil is straightforward, and it just using a dip stick to verify levels and quality. Follow these procedures to see if your car requires oil:
You should check the engine oil regularly to avoid premature wear. In an ideal world, you’d do this every time you stop to refuel, but at the very least before longer excursions, such as vacations. The engine should be warm and you should have driven at least ten kilometres to accurately determine the oil level. Before checking the engine oil, park the car in a level area and wait at least two minutes for the circulated oil to drain back into the oil pan.
How to use a dipstick to check the oil level
Pull the dipstick out of its holder and wipe it clean with a towel to check the engine oil level. Then, until it clicks into place, slide it back into the holder. You should be able to see where the oil on the dipstick reaches if you draw the dipstick out again. The oil level should be in the middle of the range between the minimum and maximum markers. You must either top-up or drain oil if the level is outside the marked range.
When refilling, go slowly because the difference in engine oil between the minimum and maximum marks is normally only half a litre to one litre. Add a small amount of oil at the start, run the engine for a few seconds, and then wait until the oil has gathered in the oil pan. You can then recheck the engine oil level and, if necessary, make any necessary adjustments as instructed.